Cylinder Head and Engine Block Quality Control

We Measure Quality, We Manufacture Trust.

We check the chemical composition, tensile strength and hardness of the materials we use in production. We leak-test cylinder heads and engine blocks with 6 bar air pressure and verify the dimensions of machined parts with a CMM.

We define the tests to be applied and the acceptance criteria according to the product’s technical requirements and the customer specification.

CMM
Coordinate
Measuring Machine
Precise dimensional measurement

Dimensional check of an engine block.

MASB
Konya, Türkiye

Real footage from our production · Muted video
Material AnalysisChemical composition check
Tensile TestTensile strength and elongation
Brinell Hardness TestMeasuring material hardness
Leak Test6 bar air on heads and blocks
CMM InspectionVerifying part dimensions

01 / Our Inspection Approach

We Know the Material,
We Measure the Parts We Make.

For the cylinder heads and engine blocks we manufacture, we inspect material properties, machining dimensions and leak tightness. The tests and measurements to be applied are defined according to each product’s technical requirements and the customer specification.

  1. 01

    Material Analysis

    We check the material’s chemical composition by spectral analysis and compare the element ratios with the relevant material requirements.

    CHEMICAL COMPOSITION
  2. 02

    Tensile Test

    We apply a tensile load to a material specimen to measure tensile strength and elongation at break, and evaluate the results against the relevant material requirements.

    STRENGTH AND ELONGATION
  3. 03

    Brinell Hardness Test

    We measure the material’s hardness with the Brinell method and evaluate the result against the hardness range defined for the product.

    HARDNESS · HB
  4. 04

    Leak Test

    We leak-test cylinder heads and engine blocks by applying 6 bar air pressure.

    6 BAR AIR PRESSURE
  5. 05

    CMM Inspection

    We check the dimensions of the machined part with a coordinate measuring machine and compare the results with the dimensions and tolerances on the technical drawing.

    DIMENSIONAL INSPECTION

02 / Inside the Material

A Closer Look at Quality.

Microstructure and mechanical test results of a grey cast iron sample.

ANALYSIS OF A SINGLE SAMPLE
100× MagnificationOriginal analysis image · Enlarge ↗

Scale bars and analysis details in the images are preserved.

Grey Cast Iron

Published sample analysis · Type A graphite structure

286N/mm²Tensile strength · Rm
207HBAverage Brinell hardnessMeasured range: 201–213 HB
1.1%Elongation · A
Type AGraphite structure
Every product is evaluated against its own technical requirements.These values belong to a single product sample selected for analysis. They are not a common material standard for all cylinder heads, engine blocks or steel castings. Material structure and test values may vary by part and customer specification.

Analysis source: Konya Technical University
Department of Metallurgical and Materials Engineering.

Spectral Analysis Results of the Sample

  • C%3.25
  • Si%1.94
  • Mn%0.674
  • P%0.088
  • S%0.055
  • Ni%0.256
  • Mo%0.003
  • Cr%0.170
  • Cu%0.349
  • W%<0.005
  • V%0.010
  • Ti%0.018
  • Al%0.001
  • Mg%<0.001

Element ratios (%) · Sample data published on MASB’s quality page.

An Evaluation Specific to Your Project

Let’s Clarify Your Technical Requirements Together.

Share your engine model, part number or technical specification. Let’s evaluate the production and quality control requirements together.

Send your technical request

Grey Cast Iron